0 5mm1 0mm 1 5mm 2 0mm 3 0mm Stainless stee Fuel nozzle siphon air atomizing nozzle two fluid nozzle diesel heavy oil waste in Sprayers from Home Garden

0 5mm1 0mm 1 5mm 2 0mm 3 0mm Stainless stee Fuel nozzle siphon air atomizing nozzle two fluid nozzle diesel heavy oil waste in Sprayers from Home Garden
0 5mm1 0mm 1 5mm 2 0mm 3 0mm Stainless stee Fuel nozzle siphon air atomizing nozzle two fluid nozzle diesel heavy oil waste in Sprayers from Home Garden
0 5mm1 0mm 1 5mm 2 0mm 3 0mm Stainless stee Fuel nozzle siphon air atomizing nozzle two fluid nozzle diesel heavy oil waste in Sprayers from Home Garden

Product Specification

Brand Name: DGSHIRUN

Sprayer Type: Pump

Type: Sprayers

Material: Metal

Spray pattern: full cone

Spray angle: 30-60 degree

working pressure: 0-10bar

Metal Type: Stainless Steel

Description:

1-8002-8003-8006-800750-20750-6

There are 6mm and 8mm inlet and outlet pipe joints for connecting nozzles. Please purchase the hole diameter of the connector. No remarks. Send 6mm connector by default.

Bore diameter: 1.0mm  1.5mm 2.0mm  2.5mm  3.0mm   3.5mm   4.0mm

Out diameter: 18mm

Totale lengte: 78mm

Olie inlaat: 1/8"

Luchtinlaat: 1/4"

Nozzle maat: 9/16"

 

Product Introduction

Siphon air atomizing nozzle is a low pressure can spray atomization of the best at low pressure air atomizing nozzle. Widely used in diesel, heavy oil, waste oil, animal and vegetable oils, alcohol-based fuel burner system, and for kerosene, oil atomization.

 

Product Features

1. The use of compressed air to swirl inside the tubes and mix the atomized droplets impact.

2. Can produce tiny micro particle size mist particles at low pressure and low volume conditions.

3. Can control the air flow and pressure to adjust the spray flow, angle and size granularity.

4. Since the fluid passage has a large, and therefore have a good anti-clogging effect.

5. In the heavy oil, waste oil burner, oil and other application viscosity of the liquid atomization effect is very good.

6. The working pressure range is 0-10/kg/cm2,different flow capacity needs different filter screen

    Flow capacity range is 1.5-1.7 L/h,needs a 45um oil filter screen
    Flow capacity range is 1.89-3.78 L/h,needs a 75um oil filter screen
    Flow capacity range is 4.76-5.10 L/h,needs a 125um oil filter screen
    Flow capacity range is 5.68-41.64 L/h,needs a 140um oil filter screen
    Flow capacity over 45.42L/h, no need for oil filter screen
 

Normally the working pressure is 3 bar, for 1.00mm version, the liquid waste is 10L/H. For 2.0mm version, the liquid waste is 19L/H. For 3.0mm version, the liquid waste is 28L/H. The capacity tolerance is ±10%. The siphon height is 30cm, and the spray angle is 45 degree. Kindly be noted above data is base on water for reference, if you use other liquid, you can calculate it by the proportion of density.

 
 

 

Application

Widely used in diesel, heavy oil, waste oil, waste oil, animal and vegetable oils, and other alcohol-based fuel oil, gas, combustion spray systems, spray workshop humidification cooling system, mechanical cleaning dust, various types of industrial spray aerosol products.

 

Search:

KLINGERSIL® C-4243 – universelle Hochdruckdichtung - KLINGER ...

Dimensions of the Standard Sheets Sizes: 1000 x 1500 mm, 1500 x 2000 mm Thicknesses: 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm, 3,0 mm; other thicknesses and ...
https://www.klinger.com.au/products/jointing-gasket-materials/compressed-fibre/klingersil-c-4243

data sheet BA120 Flat gasket material

Page 1 of 2. Gaskets. Fibre rubber ... FA-A1-0. Density. DIN 28090-2 g/cm³. 1,7. Compressibility. ASTM F 36/J. %. 11 ... 0,5 mm; 1,0 mm; 1,5 mm; 2,0 mm; 3,0 mm.
https://thoenes-solutions.com/media/pdf/ab/b8/3d/BA-120_ENGLISH.pdf

Once in a Blue Moon-price list

9 0 0 6 0 0 m m1 0 0 0 7 0 0 m m 】. 1 4 0 0 9 3 5 m m 【 1 5 0 0 1 0 3 5 m m 】. 2 0 0 , 0 0 0. 3 0 0 , 0 0 0. 5. 3. Once in a Blue Moon (Page number of Photo book) ...
https://www.sayurinaito.com/uploads/1/2/2/0/122091962/once_in_a_blue_moon-price_list.pdf

SF TRD 401

Page 1 of 2. Gaskets ... DIN 28091-4. GR-10-O-O. Density. DIN 28090-2 g/cm³. 1, 0. Compressibility ... Thicknesses * 0,5 mm; 1,0 mm; 1,5 mm; 2,0 mm; 3,0 mm.
https://thoenes-solutions.com/media/pdf/45/f0/c4/SF-TRD-401_ENGLISHtEt1QRIAOge9D.pdf

5 mm 1,0 mm

The door leaf is made of 5 mm hard, transparent polycarbo- nate plastic. This material is extremely impact-resistant and thus capable of withstanding minor ...
https://www.doorsystem.dk/fileadmin/user_upload/PDF/Produktblad_Polycarbonat_UK_050618_screen.pdf

TYTAN® MOSAIC PLASTERS MA (1,5 mm / 1,0 mm) MA 002 MA ...

TYTAN® MOSAIC PLASTERS MA (1,5 mm / 1,0 mm). MA 002. MA 006. MA 008. MA 011. MA 012. MA 014. MA 016. MA 018. MA 020. MA 022. MA 024. MA 004.
http://www.vosa-mvs.cz/data/q/F/f/TYTAN-MOSAIC-PLASTERS-colors-M.pdf

Particle size inside the pellets - www.renergyuk.com

The size of the sieves to be used may be as following: 0,25mm- 0,5 mm - 1,0mm1,4mm – 2,0 mm -3,15 mm, which means that the fractional distribution of the ...
http://www.renergyuk.com/particle-size-inside-the-pellets/

75mm 100mm 7 5 mm 1 0 0 mm 577mm 266m m 7 5 0 mm 60° 60 ...

Adjustable Tilting DUAL Desk Mount Bracket for LCD LED (Max 33Lbs, 13~ 27inch) - Black. 5561. Adjustable Tilting DUAL Desk Mount Bracket for LCD.
https://downloads.monoprice.com/files/diagrams/5561_Diagram_170918.pdf

Les matières à graver Trotec

Epaisseur : 0,5 mm / 1,0 mm / 1,5 mm / 2,0 mm. Matière : aluminium anodisé monocouche. Aluminium anodisé brillant. L'aluminium anodisé brillant saura ...
https://www.matieres-a-graver.fr/

LASE ONE accessories - 2017 catalog

Jul 2, 2017 ... LASE ONE ACCESSORIES - 2017 CATALOG v1.0 ..... Available diameters: 0, 5 mm; 1, 0 mm; 1, 6 mm; 2, 4 mm. REFERENCES : Ø 0,5 mm ...
https://www.sstmicrowelding.com/sites/default/files/resources_640198574/lase-one_accessories_-_catalog_2017.pdf

Screwdrivers for watchmakers: with nickel plated steel handle

919. Screwdriver set for watchmakers No. 919. nickel plated steel handle, set of 6 pieces in wooden case 1,0 mm - 1,5 mm - 1,8 mm - 2,3 mm - 2,9 mm - 3,6 mm ...
https://www.dick.de/en/tools/products/screwdrivers

max 9 0 mm 1 1 5 mm 160mm 65mm 160mm 42mm160mm 160mm ...

Page 1. 5. 1. 0 m m. 160mm m in. 1. 0 m m. -m a x. 9. 0 m m. 1. 1. 5 m m. 160mm. 65mm. 160mm. 42mm160mm. 160mm 65mm. 3. 6. 5 m m. 1. 0. 0 m m. 100mm.
https://s3-ap-southeast-2.amazonaws.com/wc-prod-pim/Asset_Documents/ANDT02C024%2520Dimension%2520Diagram.pdf

MicroKros

0,2 µm, 0,1 µm. Polyethersulfone (PES) 0,5 mm, 1,0 mm. 0,5 µm, 0,2 µm. Polysulfone (PS) 0,5 mm. 0,05 µm, 20 nm (500 kD), 100 kD, 50 kD, 10 kD. 1,0 mm.
https://www.interchim.fr/ft/K/KROMIN.pdf

Certificate of Conformity of the Factory Production Control 1213 ...

Apr 2, 2019 ... 1,5 mm, 1,8 mm, 2,0 mm compatible with bitumen (BV); application: exposed / covered. TECTOFIN RV. 1,2 mm, 1,5 mm. TECTOFIN RV-plus.
https://www.skz.de/de/pruefung/produktzertifizierung/m_126652

SILIKON PROTECT 031 – Kreisel

Description. • grain sizes: 0,5 mm, 1,0 mm; 1,5 mm; 2,0 mm; 3,0 mm • consumption: 1,5 mm – ca. 2,5 kg/m2 • coverage: ca. 10,0 m2/bucket/BR 1,5 mm  ...
http://kreisel.ie/product/renders/silikon-protect-031/

Multi 25

Inner liner thickness: 0,5 mm (1,0 mm optional). 0,6 mm (1,0 mm optional). Outer wall thickness: 0,5 mm. 0,6 mm. 0,7 mm. Weight (kg/m) 0,6 mm. 3,5 4,2 5,2 5,8 6 ...
https://www.kierulff.dk/wp-content/uploads/2018/04/Databladmulti25-1.pdf

Components - IT-V Innovative Technologie Völp, Innsbruck, Tirol ...

18G Nadel (20cm) preloaded with 1 GM Ø1,0 mm x 3 mm (3 Stück). ART.-NR. GM1051820-1. 18G Nadel (20cm) preloaded with 1 GM Ø1,0 mm x 5 mm (1 Stück).
http://it-v.net/en/products/goldmarker/components/index.htm

Silicone tubes - translucent - non-tinted ... - Interlock Medizintechnik

Silicone tubes - translucent - non-tinted - IDM: 1,0 mm. Silicone tubes - translucent - non-tinted - IDM: 1,0 mm. similar to picture. Silicone tubes - translucent ...
https://www.interlockmed.com/en/products/cssd/tip-guards-and-silicone-products/miscellaneous-tip-guards/silikonschlaeuche-transluzent-nicht-eingefaerbt-1-0-mm-0-5-mm-1-5-mm-09017.html

Metalbestos-5000 Multi25

600. External diameter: 130 150 180 200 230 250 280 300 350 400 450 500 550 650. Inner liner thickness: 0,5 mm (1,0 mm optional). 0,6 mm (1,0 mm optional).
http://www.kierulff.dk/wp-content/uploads/2018/05/DatabladMetalbestos-5000Multi25engelsk.pdf

CABLES & SPARE PARTS

L1-POSI. ELECTRODE HOLDING GRIPPER. Available diameters: 0, 5 mm; 1, 0 mm; 1, 6 mm; 2, 4 mm. REFERENCES : Ø 0,5 mm : L1-PE-05. Ø 1,0 mm : L1-PE-  ...
https://www.artemgroup.eu/images/catalog/Masini%2520unelte,%2520echipamente%2520si%2520instalatii/Instalatii%2520de%2520microsudura/SST/LASE%2520ONE%2520accesorii.pdf

Commetns nijniy-novgorod.sch3vrn.ru :